Which spring and needle ? – SU HS6 For Landrover series

For those who have not read my set up of SU HS6 carburetor for land rover series 3 you can read it Part 1 here and Part Two here:

As you may aware, I bought the carburetor SU HS6 as a complete unit, it comes with BAK needle and green spring, and that what I use for the initial set up… It works but may be not optimal… from the forum and discussion, they are few suggestion:

  1. Copy ACR set up with BGB needle and Black spring
  2. BDM needle with red spring
  3. BDB or BBW but not sure what spring they use..

Just to remind you on the profile of the needle, you can see below  that BGB is very rich needle, BBW second, BAK third, BDM fourth and BDB is the leanest…

needle su

Actually I want to copy ACR set up, however after having discussion with Burlen… there is no such thing as black spring for HS6, I think they do not want to be copied, and may be they change the color of the spring to hide the their set up…

Finally I ordered BDM and BDB needle and  red spring, hence I have three needles and 3 springs (one spring is from old SU)… it will be interesting the try all possible combination.. :).

Here some photos when I am tried needle and spring combination

Three springs SU HS6

Three springs SU HS6 : the Green, the red and the unknown.. (from right to left)

 

IMG-20140409-01859

Needle BDM and BDB fro burlen

 

IMG-20140409-01856

Off the Dashpot, and we can easily change the spring and needle

IMG-20140409-01855

Replace The spring with the another spring we want

IMG-20140409-01857

Off the old needle and the new needle is ready to be installed

IMG-20140409-01858

The needle center lead… its funny because actually the needle is slightly not centered even using this centering aid..

To make it apple to apple, first I have to make sure that the ignition timing is at 6 deg BTDC as suggested by ACR using their Cyl head.

So.. after the few tries… I finally concluded that the setup is best using green spring and BDB needle... The others also works but at high throttle it missed fire or blow back… or severely lost power compare to this one.  it is quite strange… ACR set up is using the richest needle, I am using the same head from ACR but it best using the Leanest of the option…

Bit confuse, but I find it very smooth and have more power using this set up, it capable of going uphill at 3rd gear,  previously it need the second gear to climb it… So thats it for now, any questions please write it down below.. hope it can be useful for you

 

Cheers for now..

 

Other set up is OK, but in the open throttle, I experienced a missed fire… even if I tried my best to adjust the

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s